Aquarian Pro 1HP
The Aquarian Pro 1HP offers Pumpage, Aeration and Mix: The high-velocity Aquarian propeller pumps an immense column of water, creating constant aeration and re-aeration in a circular manner. A continuous turnover prevents stratification to depths of up to 12 feet.
Air-O-Lator equipment is manufactured either to UL, CSA, or NEMA standards. All 1 horsepower units are provided with a CRC control box with run capacitors housed in a UL listed NEMA 3R enclosure; conduit wiring is permitted.
Ice Melting: During the winter months, keep water areas open around docks and piers or for ducks, waterfowl, fish, and livestock with the Sling Rope De-Icing Kit. The kit pulls warm water up to the surface creating an open circular area on lakes or ponds at a rate of eight feet diameter per foot of propeller depth.
Suggested Mooring: Use approximately three feet of mooring rope per foot of water depth to allow for water level fluctuation. Tying unit to the shore is also acceptable if visible mooring ropes are not objectionable.
- Rugged, stainless steel 1hp, 230v, single phase Franklin Electric submersible motor, UL778 recognized, water-cooled and lubricated
- Eco-friendly motor (no oil required)
- No long shafts to bend or become out of balance: 5/8” diameter, 1-1/2” long motor shaft
- No seals or bearings to maintain
- 50’ water resistant power cable. Longer lengths available in 50’ increments.
- High-speed, foul resistant propeller. High shearwater spraying action. No lazy spray or bubbles.
- Computer designed diffuser engineered to break up the water column for the best oxygen transfer rate.
- Limited two-year warranty
- Propeller guard (optional)
- Backed by our outstanding customer service
- Ground fault protection on single phase units
- Standard wire size is 12/4. Call for pricing and wire requirements for longer runs.