Font’N-Aire Ready Fountain

Showing all 2 results

Two Fountains in One - Air-O-Lator - Pond Aeration & Maintenance Products

Two Fountains in One

With the Ready fountain, it is possible to convert a centrifugal pump display fountain to a high volume propeller pump aerating fountain, or vice versa, without the need of  purchasing two separate fountains. The design of the Font’N-Aire Ready and Platinum fountains allows this because the motor and mounting structure (drive structure assembly) are the same. When converting from a centrifugal pump display fountain to a propeller pump pond aeration fountain, simply remove the four (4) bolts that connect the centrifugal pump to the motor mount and remove the pump assembly. Install the propeller to the motor shaft and then the Carnival nozzle to the motor mount with four (4) bolts, a simple five-minute procedure that can be done in the field with a 7/16” wrench. The same procedure can be done to change a propeller pump aerating fountain to a centrifugal pump aesthetic fountain.

Feature - Air-O-Lator - Pond Aeration & Maintenance Products

Feature

  • Six spray patterns available
  • Standard and Reduced volume options
  • 100’ of power cable with a water-tight removable connector, longer lengths available in 50’ increments. [Required: a single phase, 3 wire w/ ground, 60 HZ, maximum length in feet, service entrance to fountain, 230 volts, 1hp, 400’ 12/4 maximum]
  • 24-hour time clock
  • Equipment Leakage Circuit Interruptor (ELCI) (US only)
  • Easy to install and maintain
  • Two-year warranty
  • Backed by our outstanding customer service